65W* of output power

A MOS-FET power amplifier provides 65W* of stable output power. A one piece, aluminum chassis helps to keep the transceiver cool and provides durable long-lasting construction.
* Depending on version

Optional digital unit, UT-118

The optional UT-118 provides digitally modulated and demodulated clear voice and data communication at 4.8kbps. Store up to 6 of your own callsigns, and up to 6 more from other stations. Or instead of recording a callsign, record any message of up to 20 characters. You may then make a call by sending one of your callsigns or a recorded CQ message. The digital callsign squelch allows you to choose an incoming call selected by the callsign. When connected to an external GPS receiver*, position information may be exchanged with other stations.
* NMEA 0183 output and RS-232C interface are required.

Simple operation

The IC-2200H retains a familiar user interface to the IC-2100H. The large tuning dial provides easy access to active channels even without looking at the front panel. Secondary functions are easily recalled by holding the appropriate button.

Dynamic Memory Scan (DMS)

With a total of 207 alphanumeric memory channels, Icom’s exclusive DMS system allows you to scan selected memory banks by simply adding and deleting bank links.

CTCSS and DTCS operation standard

The IC-2200H contains 50 CTCSS and 104×2 DTCS encode/decode plus tone scan functions. The “pocket beep” feature gives you an audible and visual indicator of an incoming call.

And more…

• 24 DTMFautodial memories
• DTMFcode squelch and pager function with optional DTMF decoder, UT-108
• Weather channel with weather alert function
  U.S.A. version only
• FM narrow mode switchable
  Depending on version
• Selectable squelch delay
• Built-in 10dB squelch attenuator

75W of output power

The combination of Icom’s one piece, die-cast aluminum chassis and 75W of transmit power gives you the most powerful 2m mobile transceiver in its class! Your communications will get through.

HM-133V, remote control microphone

The backlit HM-133V*, gives you control of your IC-V8000 in the palm of your hand. The Icom exclusive “Hot keys” (F1/F2) memorize the transceiver full settings. As if switching between two separate radios, all operating frequencies, tone settings as well as the display color, fan speed, and set mode settings are memorized.
* Optional for some versions.

Dynamic Memory Scan (DMS)

With 200 alphanumeric memory channels, Icom’s exclusive DMS system gives you flexibility over your scanning lists never offered before in a 2m mobile, fully customizable into 10 banks.

CTCSS and DTCS operation standard

50 CTCSS and 104×2 DTCS encode/decode plus tone scan functions for various communication applications. The “pocket beep” feature gives you an audible and visual indicator of an incoming call.

Weather Alert Scan (U.S.A. version only)

An amateur radio first, the IC-V8000 features a weather alert function to keep you on top of any weather emergencies. With a weather radio mode or weather alert, you are ready for quick response.

Easy Operation

The perfect solution for mobile operation, the ICV8000 has a front firing speaker providing crisp and clear audio. Along with a 6 character alphanumeric display, it offers quick reference of user-defined memory channel information.

Standard DTMF encoder and optional decoder

10 DTMF memory channels with up to 24-digit DTMF codes can be used to control other equipment. The optional UT-108 DTMF decoder provides code squelch and pager functions.

And more…

• FM narrow mode switchable
  (U.S.A. version only)
• Selectable squelch delay
• 10dB squelch attenuator
• Cloning capability from PC or between radios

IC-208H

VHF/UHF FM Transceiver

features

Powerful 55W/50W output power

Individual MOS-FET power amplifier modules supply the power for Icom's most powerful dual band mobile with 55W/50W (VHF/UHF). Stable power for long distance communications plus reduced power settings (15/5W) for local communications.

Wideband Receiver

See why Icom has a world renowned reputation for superb wideband receivers with the IC-208H. The IC-208H wideband receiver covers 118-173, 230-549 and 810-999MHz* as standard. Listen to your Amateur VHF/UHF bands, as well as aviation, marine, weather and other utility communications in a compact mobile package. Extends your mobile radio enjoyment!
* Excluding Cellular range.

Detachable front panel

Limited installation space is no problem with the IC-208H. The separation cable, OPC-600/R, is supplied with the radio allowing the compact remote control head* to be installed almost anywhere.
* 111 (W) × 40(H) × 26.3 (D) mm; 43.8 × 19.16 × 11.32 in.

500 alphanumeric memory channels

With this much memory, you can fill your IC-208H with your favorite frequencies and operation settings such as output power, tone, and more! Then name each memory channel with up to 6 characters for quick channel identification.

Improved Dynamic Memory Scan (DMS) system

The improved DMS system allows you to scan all the selected banks you want to scan by simply adding/deleting bank links with Icom's exclusive Bank Link system. Yet another convenient feature to make the IC-208H more practical radio.

User friendly design

The large multi-function tuning knob provides intuitive channel tuning or band hopping. The multicolor display lighting and backlit buttons adds a new "fun" dimension to operating the IC-208H.

HM-133 remote control microphone

The supplied HM-133 remote control microphone allows you to control almost every function of the IC-208H from the mic.

Additional Features

• Built-in CTCSS and DTCS tone squelch
• Pocket beep and tone scan
• Selectable squelch delay
• FM narrow capability
• RF attenuator linked to the squelch control
• 16 DTMF memory channels (24 digits per channel)
• 9600bps data connector (mini DIN 6-pin)
• Auto repeater function*
• Weather channel with weather alert*
  

ID-800H

VHF and UHF Digital Transceiver

features

Digital Dual Band Mobile with Wideband Receiver

IC-2820H

Dual Band FM Transceiver

features

The IC-2820H receives 118-549.995 and 810- 999.990MHz* with dualwatch receiver capability that allows you to receive two bands simultaneously (including within a single band)*. Almost all VHF& UHF communications are available to you!
* See specifications for receive range coverage.

Diversity receive capability

If you have two antennas, diversity receive* capability is useful for mobile operation where the received signal strength changes continuously. Within a single band, the radio compares signal strength from each antenna and chooses the better signal to maintain good sound and receive quality.
* Available on 127, 136, 146, 375, 440, 500MHz bands in FM, FM-N, DV mode only.

50W output power on both VHF and UHF bands

A MOSFET power amplifier provides a powerful 50W on both the 2m and 70cm bands, making this compact rig's signal travel for miles! Output power is selectable in 3 steps.

User-friendly operation

The large 93 × 28 mm (3²¹/₃₂ × 1³/₃₂ in) full dot matrix display presents an easy-to-read graphical interface, viewable over a wide angle. Push the "Function" button to call up the assigned functions menu on the display. In addition, tuning knobs and buttons for each band are arranged side-by-side, providing intuitive operation. 

Separate controller from main unit

The controller is separated from the main unit for flexible installation. The controller has magnets on the rear panel, allowing you to attach the controller to the main unit or other metal objects. This makes clean and neat installation easy! A 3.4m separation cable, OPC-1663, and a short cable (10cm), OPC-1712, are included.

522 memory channels

The IC-2820H has a total of 522 memory channels, 500 regular channels, 2 call channels and 20 scan edge channels. Each memory channel stores tone frequency, skip information and so on. The Dynamic Memory Scan (DMS) system divides these memories into 26 groups, A to Z, and provides easy channel selection. Of course, bank scanning is also possible.

Band scope function

The band scope function lets you watch conditions near the receiving frequency and visually assists in finding other stations.

Other features

• ±2.5ppm high frequency stability with TCXO unit
• Green to amber variable display background color
  
• 104 × 2 DTCS/50 CTCSS tone squelch operation
• Max. 45 channel/sec. high speed scan capability in programmed scanning mode
• 9600bps packet terminal, mini DIN (6-pin) connector
• Long or short squelch delay
• Automatic attenuator
• FM narrow capability
• Sub-band auto mute function
• 16 DTMF memory channels (24 digits)
• DTMF pager and code squelch function
• Auto power off
• Auto repeater function (USA version only)
• DTMF remote control function (USA version only)
• Weather channel with weather alert function (USA and EXP versions only)

 

D-STAR DV mode + GPS receiver

The optional UT-123 provides D-STAR DV mode operation plus GPS receiver capability. Your location information can be sent simultaneously with the digital voice transmission.

Location information exchange

The IC-2820H sends your location information either when the mic PTT switch is pushed, or at a preset interval (5 seconds - 30 minutes). When available from a calling station, the IC-2820H displays the distance and direction to the station.

GPS alarm

The GPS alarm alerts you by beeping when a preprogrammed point is within 500m or 1km range from your location or anyone of preprogrammed points is within a preset square range.

GPS location tracking

When connected to a PC* via the optional RS-232C cable, OPC-1529R, your own or the received location information can be plotted by map software* on a PC.
* Serial port and map software (NMEA 0183) are required.

One touch reply function

The one-touch reply function makes it easy to respond to a calling station instantly. In addition, up to 20 received callsigns are automatically stored as received call records.

Built-in voice recorder and auto reply function

The built-in voice recorder* records an incoming call for up to 30-seconds (approx.), (or 15 sec. × 2 tracks, 10 sec. × 3 tracks). The 10 sec. transmit memory allows you to record your callsign or other message, and also automatically answers when you receive a message.
* Available in DV mode only

Low-speed data communication

When connected to a PC* via the optional data cable,
OPC-1529R, the data communication is available simultaneously with a digital voice transmission.
* Serial port and serial communication software are required.

DX communication over the D-STAR system

D-STAR repeaters for 144 and 440MHz are now available, allowing cross-band (144/440/1200 MHz) operation and long distance communication via the Internet over the D-STAR system.